It is essential that these operating instructions be thoroughly studied before using the firearm to assure proper and safe gun handling. 

Failure to follow these instructions or failure to obey a safety warning may result in injury to you to others, or to the product. 

1. Do not carry a loaded gun with a live round in the chamber while walking. running, climbing a tree, crossing a fence or anywhere you might slip or fall, drop the gun or otherwise bump or jar the gun. A un that is dropped, bumped, or jarred with chambered round might accidentally discharge even with the safety on causing serious injury to you or someone else. When a round is chambered keep safety on until you are ready to shoot. 

2. Do not rely on the safety to prevent accidental discharge. Many safeties merely block the trigger and prevent firing by pulling the trigger The safety may not prevent an accidental discharge due to dropping, jarring, or bumping a gun. 

3. Use only ammunition for which the gun is chambered as indicated on the barrel, to prevent excessive pressure and possible serious personal injury. 

4. Incorrectly reloaded ammunition can cause serious personal injury and damage to the firearm due to excessive pressure. Reload only after proper instruction and in strict compliance with instruction and data contained in current reloading manuals. 

5. Never point a gun at anything you do not intend to shoot. Always keep pointed in a safe direction in case of accidental discharge. 

6. Always check to insure that the barrel is free of obstructions before loading and using the gun. If you experience light recoil or off sound, check the barrel for obstruction. 

7. Before firing, clean any grease or oil out of barrel with cleaning rod and patch. Grease or heavy accumulation of oil can cause excessive pressure and result in serious personal injury. 

8. Keep barrel, chamber and action free of rust. Rust in the barrel and chamber can cause excessive pressures resulting in serious injury. A rusted, pitted or eroded barrel should be replaced. 

9. Use hearing protection to prevent ear damage from repeated exposure to gunfire. 

10. Always use proper shooting glasses to prevent eye injury from flying particles. 

11. Never carry a loaded gun in a motor vehicle or carry one into a dwelling. Always carefully unload the gun before entering a motor vehicle, a dwelling or an area such as a camp. Always point gun in a safe direction while loading or unloading to prevent serious injury in case of an accidental discharge. Never load in the house or in your vehicle. 

12. Never shoot at a hard, flat surface or at the surface of water to avoid a ricochet and possible serious personal injury to yourself or a bystander. 

13. Store guns in a clean dry place out of reach of children and separated from stored ammunition. 

14. Never alter any parts in your gun. Any alterations or adjustments that may become necessary to the operating mechanism should be performed by a qualified gunsmith. 

CAUTION Always keep the muzzle pointed in a safe direction. Prior to using live ammunition, familiarize yourself thoroughly with these operating instructions. Get accus- tomed to the feel of your new gun — know the forces required to operate the action*, to pull the trigger and above all, know the location of the safety which, on this shotgun, is on the trigger guard. The safety is placed in the “on” position when pushed from left to right (Figure 1A) until the red “warning” ring disappears. When the red ring is visible on the left side of the safety, it is in the “off” position, and the gun is ready to fire. The safety can only be placed in the“on” position when the hammer is cocked. 

*ACTION: the mechanism of a firearm which loads and secures the cartridge in the chamber. 

WARNING — As is true with other firearms, the safety mechanism, when it is engaged, is designed to prevent the trigger from being pulled. However, this mechanism will not necessarily prevent the accidental discharge of this firearm as a result of jarring or abuse such as occurs when a firearm is dropped. 

Keep your fingers clear of the ejection port. The breech bolt like most all automatic actions, is under strong spring tension and closes very swiftly. If closed on a finger, it will cause a painful injury. 

IMPORTANT — Clean the inside of the barrel and chamber to remove all grease and other possible obstructions before firing your gun. 

IMPORTANT — With the barrel removed from the receiver do not allow the breech bolt to close unrestricted. Repeated, full force, closing of the bolt with the barrel off will abuse the action parts. Instead, grasp the cocking handle before pushing the action release button and permit the action to close slowly. 

1. Make sure the gun is not loaded and the safety is in the “on” position. (The red warning band must not be visible). 

2. Unscrew and remove the valve cap assembly from the magazine tube (Figure 2). 

3. Slide the forearm forward and off the magazine tube. 

4. Place the forearm against the barrel as illustrated and slide the forearm forward over the magazine bracket (Figure 3). The magazine bracket on the barrel should be completely hidden by the forearm. 

5. Carefully place the breech bolt in the forward position as previously instructed. 

6. Holding the barrel-forearm combination in one hand, insert the magazine tube (4"A") into the opening in the rear of the forearm. Slide the barrel and forearm together back as far as it will go. There should be no space between the front of the receiver and the matching shoulder on the barrel (Figure 4). 

7. Check to ensure the ejector is in proper position in barrel extension cut. 

8. Replace the valve assembly back onto the magazine and turn until “hand tight”. 

Use the correct ammunition referenced by the inscription on the barrel. Before loading your gun be sure all grease and oil has been removed from the barrel and chamber, and there is no obstruction. 

1. Pull the cocking handle all the way back until the breech bolt latches open. 

2. Place the safety in the “on” position. The chamber can now be loaded by inserting a shell directly into the ejection port (Figure 5). 

3. Keep your fingers clear of the ejection port and press the action release button (Figure 1A) on the under side of the receiver. The action will snap closed placing the shell in the chamber. The gun is now ready to be fired single shot. 

LOADING THE MAGAZINE —

1. With the safety in the “on” position and the action closed, push the shot shell upwards against the carrier and forward into the magazine (Figure 6). There will be a “click” as the cutoff (the part that holds the shell in the magazine tube) snaps into position. 

2. Repeat the previous step to load the second shell into the magazine tube, again making sure the cutoff has snapped into position. 

TO UNLOAD THE CHAMBER AND MAGAZINE — Be sure the safety is in the “on” position (the red warning band must not be visible). 

1. Pull the cocking handle all the way back, extracting and ejecting the shell from the chamber. 

2. Release the cocking handle allowing the bolt to close. Repeat this operation until the gun is empty. After the last shell is ejected the breech bolt will latch in the open position. 

IMPORTANT — Always visually check and know for sure that your gun is not loaded, by viewing both the chamber and the magazine through the open action. 

ALTERNATE WAY TO UNLOAD — The shells can be removed from the magazine first by: 

1. Place the safety in the “on” position. 

2. Turn the gun over so the trigger guard is up, then push the carrier down as far as it will go. 

3. Push inward on the cartridge cutoff (Figure 7A) on the right releasing the shell from the magazine. Press the cutoff again to release the second shell. 

4. With the safety still in the “on” position, pull the cocking handle all the way back to remove the shell from the chamber. 

With the Safety “On” (Figure 1A), load your gun as previously instructed. When ready to shoot, firmly shoulder your gun and push the safety to the ”off” position exposing the red warning ring. Aim, and when on target pull the trigger to fire. 

When fired, the automatic action will eject the fired shell, cock the hammer and on closing will place a new shell from the magazine into the chamber ready for the next shot. When the last shell in the gun is fired the action will remain open and convenient for reloading . When through firing always put the safety in the “on” position. 

1. Open the action and make sure the gun is not loaded. 

2. Close the action and place the safety in the “on” position. 

3. Unscrew and remove the valve assembly from the magazine (Figure 1 ). 

4. To remove the barrel, slide the barrel and forearm forward as a single unit until the forearm clears the end of the magazine tube. 

5. Remove the forearm from the barrel by sliding the forearm to the rear and lifting free of the magazine bracket on the barrel. 

1. Remove the barrel and forearm as explained earlier. 

2. Be sure gun is unloaded. Close action, push safety to “on” position, turn gun until trigger guard is up, and push out trigger guard pin from left (Figure 8). 

3. Lift trigger group out of receiver by pulling on trigger guard (Figure 9). 

4. Do not pull trigger after disassembly . 

5. The piston is under spring tension. With the gun upright and the magazine minted in a safe direction, insert a screwdriver or a suitable rod into the coils of the closing spring at the forward end of the slot in the top of the magazine tube. Draw back on the tool relieving the tension from the piston. While holding the spring compressed, remove the piston pin that connects the slide arms to the piston. Place your free hand over the end of the magazine tube, then remove the tool from the coils and withdraw the piston and closing spring from the end of the tube. Disconnect and remove the slide arms from the receiver. 

NOTE: When reassembling the coil spring, place the end having the smaller coils toward the breech end of the magazine tube. 

6. With the bolt assembly in the receiver, disengage the cocking handle bridge by first pushing the rear of the fir- ing pin forward with your forefinger. Holding the firing pin in this position, tilt the front end of the cocking handle bridge up and move it slightly forward, detaching the bridge from the bolt slide. Remove the firing pin and spring.

7. Slide the breech bolt with the cocking handle to the rear of the receiver. Grasp the cocking handle and by tipping and manipulating the handle, remove the cocking handle bridge out through the ejection port in the receiver. Now the breech bolt assembly may be lifted out or slide out the front of the receiver. 

NOTE: For cleaning purposes no further dismantling is necessary or recommended. 

NOTE: REASSEMBLE IN REVERSE ORDER. 

REMOVAL — To remove the WINCHOKE from the barrel, insert the projection on the special WINCHOKE tool into the hole on the knurled portion of WINCHOKE tube and turn counter-clockwise. 

INSTALLATION — The WINCHOKE should be snugly fitted, but not over-tightened for ease of removal later and possible damage to the barrel. The WINCHOKE has a right hand thread and with the aid of the special tool simply screw the tube of your choice into the muzzle of the barrel. 

Do not attempt to fire your WINCHOKE shotgun with the choke either loose in, or removed from, the barrel. 

1. Be sure that your gun is unloaded before attempting to clean. 

2. The gun owner is responsible for periodic inspection and proper maintenance by a qualified gunsmith to ensure that this firearm remains in proper adjustment and that worn parts are replaced. 

3. REMEMBER — Rust is neglect — Make sure all exposed metal surfaces are coated with a film of oil. After being subjected to damp weather, thoroughly wipe the bore and wipe off the metal surfaces. Then apply a new film of oil. If exposed to a soaking rain, snow or salt spray a more thorough cleaning and oiling may be necessary, requiring removal of the trigger guard and breech bolt assemblies. 

4. Between seasons, apply a coat of grease to the bore and metal parts and store in a dry place. Do not plug the barrel, or store in a case made of fabric or material which will absorb the lubricant from the gun. 

5. Repair parts are available through your local authorized Winchester Dealer — or authorized service center. Please be sure to include the Model number and Serial num- ber of your gun when ordering parts. 

If your Winchester firearm should ever need service or repair, it is often best to utilize one of our Authorized Service Centers for Winchester firearms. In some cases it is appropriate to use the Winchester Service Center in Arnold, Missouri. A list of Authorized Service Centers is included with your new firearm. If you need a new listing, please contact us. We can help you determine the best place to send your firearm for service. 

In order to avoid delays, it is important to never send your gun directly to our facility without direct authorization from one of our service specialists. This avoids possible delays in obtaining service. Contact us for details on how to receive service prior to sending your gun. 

Parts listings, Authorized Service Center lists, service procedures and general product information can also  be found on the web at www.winchesterguns.com.

CAUTION: PARTS ARE MADE FOR CURRENT WINCHESTER BRAND GUNS AND SHOULD NOT BE USED IN OTHER GUNS EVEN THOUGH MODELS MAY BE SIMILAR. IMPROPERLY FITTED PARTS MAY BE DANGEROUS.

An information resource for Winchester Repeating Arms can be found online at winchesterguns.com. 

• List of Authorized Repair Centers.
• Customer Service information.
• Firearm Service/Repair Form.
• Answers to many technical and historical questions.
• Links to helpful sites.

You Are Responsible For Firearms Safety. 

As a gun owner, you accept a set of demanding responsibilities. How seriously you take these responsibilities can mean the difference between life and death. Failure to follow any of these instructions can cause extensive damage to your gun and/or possible serious injury or death to yourself and others. There is no excuse for careless or abusive handling of any firearm. At all times handle any firearm with intense respect for its power and potential danger. READ AND UNDERSTAND all of THE CAUTIONS AND PROPER HANDLING PROCEDURES OUTLINED IN THIS BOOKLET BEFORE USING YOUR NEW FIREARM.  

1. ALWAYS KEEP THE MUZZLE OF ANY FIREARM POINTED IN A SAFE DIRECTION.

Do this even though you are certain the firearm is unloaded. Never point any firearm at anything you do not intend to shoot. Be extremely alert and aware of all persons and property within the range of your ammunition.  

2. NEVER RELY TOTALLY ON YOUR SHOTGUN'S MECHANICAL "SAFETY" DEVICE.

Always assume that your gun can be fired at any time, even with all the safety mechanism engaged. The word "safety" describes a gun's trigger block mechanism, sear block mechanism, hammer block mechanism or firing pin block mechanism. These mechanical devices are designed to place your gun in a SAFER status. No guarantee can be made that the gun will not fire even if the "safety" is in the "on safe" position. See "Operation of the Safety" in your owner’s manual for instructions on operation of your gun's "safety." 

3. LIKE ANY MECHANICAL DEVICE, A "SAFETY" CAN SOMETIMES FAIL; IT CAN BE JARRED OR INADVERTENTLY MANIPULATED INTO AN UNSAFE CONDITION.

Mechanical "safeties" merely aid safe gun handling and are no excuse for pointing your shotgun's muzzle in an unsafe direction. 

While it is a good idea to "test" your shotgun's mechanical "safeties" periodically for proper function, never test them while your firearm is loaded or pointed in an unsafe direction. Safe gun handling does not stop with your gun's mechanical "safety" devices -- it starts there. Always treat this shotgun with the respect a loaded, ready-to-fire firearm. NEVER TEST THE MECHANISM OF ANY FIREARM WHILE IT IS LOADED OR POINTED IN AN UNSAFE DIRECTION.

4. WHENEVER YOU HANDLE A FIREARM, OR HAND IT TO SOMEONE MAKE SURE IT IS COMPLETELY UNLOADED.

Always open the action immediately and visually check the chamber magazine. Make certain the chamber does not inadvertently contain any ammunition.  Always keep the chamber empty and the "safety" in the "on safe" position unless shooting is imminent. 

5. DO NOT TRANSPORT ANY FIREARM LOADED. KEEP ALL FIREARMS UNLOADED DURING TRANSPORT, WHETHER IN A SCABBARD, GUN CASE, OR OTHER CONTAINER.

6. HUNTING FROM ELEVATED SURFACES SUCH AS TREE STANDS IS DANGEROUS.

Doing so may increase the risk of handling a firearm. The following rules should always be observed by you and those you hunt with: Always make certain that the stand being used is safe and stable. Always make certain that your firearm is unloaded when it is being taken up and down from the stand. Always make certain that your firearm is not dropped from the stand, or dropped while it is being taken up or down from the stand. Remember, a loaded firearm may discharge when dropped, even with the safety in the "on safe" position. 

7. BEWARE OF BARREL OBSTRUCTION.

Do this for the safety of both your gun and yourself. Mud, snow, and an infinite variety of other objects may inadvertently lodge in a barrel bore. It takes only one small obstruction to cause dangerously increased pressures that can ruin (swell or rupture) the finest shotgun barrel.

BEFORE CHECKING FOR A BARREL OBSTRUCTION, BE CERTAIN YOUR FIREARM IS FULLY UNLOADED.

Make sure no live rounds are in the chamber. Place the safety in the "on safe" position, open the breech or action and look through the barrel to be sure it is clear of any obstruction. If an obstruction is seen, no matter how small it may be, clean the bore with a cleaning rod and patch as instructed for your particular firearm. Before the first firing, clean the bore with a cleaning rod and patch, and wipe away any anti-rust compounds in the action/chamber areas.  

8. ALWAYS UNLOAD ALL FIREARMS WHEN NOT IN USE.

As a safety precaution, it is preferable to disassemble your gun for storage. Your responsibilities do not end when your firearm is unattended. Store your gun and ammunition separately -- well beyond the reach of children. Take all safeguards to ensure your firearm does not become available to untrained, inexperienced or unwelcome hands. 

9. USE THE PROPER AMMUNITION.

The barrel and action of all Browning firearms have been made with substantial safety margins over the pressures developed by established American commercial loads. Nevertheless, Browning assumes no liability for incidents which occur through the use of cartridges of nonstandard dimensions which develop pressures in excess of commercially available ammunition with standards established by the Sporting Arms and Ammunitions Manufacturers' Institute (SAAMI). 

BE ALERT TO THE SIGNS OF AMMUNITION MALFUNCTION. 

If you detect an off sound or light recoil when ammunition is fired, DO NOT LOAD MORE AMMUNITION INTO THE CHAMBER. Open the action and remove all ammunition from the chamber. With the action open, glance down the barrel to make sure that a wad or other obstruction does not remain in the barrel. If there is an obstruction, completely clear the barrel before loading and firing again. Failure to follow these instructions can cause extensive damage to your gun and possible serious injury to yourself and others. 

10. MAKE SURE OF ADEQUATE VENTILATION IN THE AREA THAT YOU DISCHARGE A FIREARM. WASH HANDS THOROUGHLY AFTER EXPOSURE TO AMMUNITION OR CLEANING A FIREARM.

Lead exposure can be obtained from discharging firearms in poorly ventilated areas, cleaning firearms or handling ammunition. Lead is a substance that has been known to cause birth defects, reproductive harm and other serious injury.  

11. NEVER INSERT A SHELL OF THE INCORRECT GAUGE IN ANY SHOTGUN. The gauge of your shotgun is marked on the side of the barrel. Store all shells of different gauges in completely separate and well-marked containers. Never store shells of mixed gauges in a common container or in your pockets.

EXAMINE EVERY SHELL YOU PUT IN YOUR GUN. NEVER PUT A 20 GAUGE SHELL IN A 12 GAUGE GUN.  The most common way to bulge or rupture a shotgun barrel is to drop a 20 gauge shell into a 12 gauge chamber. The 20 gauge shell, unfortunately, will not fall completely through the barrel; its rim is caught by the front of a 12 gauge chamber. Your gun will misfire (with the chamber appearing to be empty). It is then possible to load a 12 gauge shell behind the 20 gauge shell. If the 12 gauge shell is then fired, the result will be a so-called “12-20 burst” which can cause extensive damage to your gun and possible serious injury to you and others. 

12. USE SHELLS OF CORRECT LENGTH.

The size of the chamber is inscribed, along with gauge and choke designations, on the side of the barrel.  Do not use 31/2" shotgun shells in a shotgun or barrel with a 2 3/4" chamber or 3" chamber.  Do not use 3" shells in a shotgun chambered for a 2 3/4" shells. Doing so can result in a build-up of dangerously high pressures that may damage your gun and possibly cause serious injury to yourself or others. 

13. DO NOT SNAP THE FIRING PIN ON AN EMPTY CHAMBER -- THE CHAMBER MAY NOT BE EMPTY!

Treat every gun with the respect due a loaded gun, even though you are certain the gun is unloaded. 

14. KEEP YOUR FINGERS AWAY FROM THE TRIGGER WHILE LOADING AND UNLOADING UNTIL YOU ARE READY TO SHOOT.

15. BE SURE OF YOUR TARGET AND BACKSTOP. Particularly during low light periods. Know the range of your ammunition. Never shoot at water or hard objects.

16. ALWAYS UNLOAD THE CHAMBER AND MAGAZINE OF ANY FIREARM BEFORE CROSSING A FENCE, CLIMBING A TREE, JUMPING A DITCH OR NEGOTIATING OTHER OBSTACLES.

Never lean or place your loaded shotgun on or against a fence, tree, car or other similar object.

17. WEAR EYE AND EAR PROTECTION WHEN SHOOTING. Unprotected, repeated exposure to gunfire can cause hearing damage. Wear ear protectors (shooting earplugs or muffs) to guard against such damage. Wear shooting glasses to protect your eyes from flying particles. Always keep a safe distance between the muzzle of your firearm and any persons nearby, as muzzle blast, debris and ejecting shells could inflict serious injury. Also, wear eye protection when disassembling and cleaning all firearms to prevent the possibility of springs, spring-tensioned parts, solvents or other agents from contacting your eyes.

18. DROPPING A LOADED GUN CAN CAUSE AN ACCIDENTAL DISCHARGE.

This can occur even with the "safety" in the "on safe" position. Be extremely careful while hunting or during any shooting activity to avoid dropping any firearm. 

19. IF ANY FIREARM FAILS TO FIRE, KEEP THE MUZZLE POINTED IN A SAFE DIRECTION.

Hold this position for a minimum of 30 seconds. Carefully open the action and remove the shell. If the primer is indented, the shell should be disposed of in a way that cannot cause harm. If the primer is not indented, your firearm should be examined by a qualified gunsmith and the cause of the malfunction should be corrected before further use.  

20. BE DEFENSIVE AND ON GUARD AGAINST UNSAFE GUN HANDLING AROUND YOU AND OTHERS. Don’t be timid when it comes to gun safety. If you observe other shooters violating any of these safety precautions, politely suggest safer handling practices. 

21. BE CERTAIN YOUR SHOTGUN IS UNLOADED BEFORE CLEANING.

Because so many accidents occur when a firearm is being cleaned, special and extreme care should be taken to be sure your gun is unloaded before disassembly, cleaning and reassembly. Keep ammunition away from the cleaning location. Never test the mechanical function of any firearm with live ammunition. 

22. SUPERVISE AND TEACH FIREARMS SAFETY TO ALL MEMBERS OF YOUR FAMILY --ESPECIALLY TO CHILDREN AND NONSHOOTERS.

Closely supervise newcomers to the shooting sports. Encourage enrollment in hunting/shooting safety courses. 

23. NEVER DRINK ALCOHOLIC BEVERAGES OR TAKE ANY TYPE OF DRUGS BEFORE OR DURING SHOOTING.

Your vision and judgment could be dangerously impaired, making your gun handling unsafe to you and to others. 

24. PERFORM PERIODIC MAINTENANCE -- AVOID UNAUTHORIZED SERVICING.

Your firearm is a mechanical device which will not last forever, and as such, is subject to wear and requires periodic inspection, adjustment and service. Browning firearms should be serviced by a Browning Recommended Service Center or by Browning's service facility in Arnold, Missouri. Browning cannot assume any responsibility for injuries suffered or caused by unauthorized servicing, alterations or modifications of Browning firearms. 

25. READ AND HEED ALL WARNINGS in these instructions, on ammunition boxes and with all accessories that you install on your firearm. It is your responsibility to secure the most up-to-date information on the safe handling procedures of your Browning gun. Browning assumes no liability for incidents which occur when unsafe or improper gun accessories or ammunition combinations are used.

26. Browning reserves the right to refuse service on firearms that have been altered, added to or substantially changed. Removal of metal from barrel(s), or modification of the firing mechanism and/or operating parts may lead to Browning’s refusal of service on such firearms. Browning will charge the owner for parts and labor to return the firearm to original Browning specifications.

DO NOT, UNDER ANY CIRCUMSTANCES, ALTER THE TRIGGER, SAFETY OR OTHER PARTS OF THE FIRING MECHANISM OF THIS OR ANY OTHER FIREARM. FAILURE TO OBEY THIS WARNING MAY RESULT IN INJURY OR DEATH TO YOURSELF OR OTHERS. 

BE CAREFUL!